Wednesday, July 15, 2026
Welding Industry News
Study on Lack of Fusion and Suppression Mechanism in Narrow Gap Laser Oscillatio
Featured Story

Study on Lack of Fusion and Suppression Mechanism in Narrow Gap Laser Oscillatio

The study proposes and systematically verifies a pre-filled narrow-gap laser oscillation welding technology, comprehensively analyzes the remodeling m

July 15, 2026 5 min read Academic & Research
+30%
Efficiency Gain
−90%
Manual Intervention
Deyang
Manufacturing Base
Vision AI
Precision Positioning

Research Institutions: Institute of Plasma Physics, Chinese Academy of Sciences & Shanghai University of Engineering Science

Abstract

This research proposes and systematically verifies a pre-filled narrow-gap laser oscillation welding technology, providing a comprehensive analysis of how laser oscillation remodels the thermodynamic and fluid dynamics behavior inside ultra-deep molten pools. The findings address a critical industry challenge: the persistent problem of sidewall lack of fusion in thick plate welding, which has long plagued nuclear power, aerospace, and heavy equipment manufacturing sectors.

Key Findings

  1. Energy Distribution Optimization

Oscillation technology fundamentally breaks the traditional highly concentrated single-peak energy distribution characteristic of laser welding. This innovation significantly reduces the peak energy density from 1067 J/mm² to 772.9 J/mm², effectively preventing excessive heat input at the weld center while greatly improving local heat accumulation at the sidewall boundary.

  1. Flow Pattern Transformation

When oscillation parameters are optimized to 1.8 mm amplitude and 40 Hz frequency, the laser's lateral heating area is effectively expanded, causing the molten pool size to transform from "narrow and long" to "wide and shallow" (increased width, shortened length). The strong mechanical stirring effect generated by these parameters successfully overcomes flow limitations dominated by surface tension.

The disordered, easily skewed asymmetric flow pattern typical of non-oscillating laser welding is forcibly converted into an ordered, symmetric strong convection mode, accelerating the radial scouring and transport of high-temperature liquid metal to both sidewalls.

  1. Mathematical Process Window Derivation

The study rigorously derives and verifies a mathematical process window for defect suppression: ``` 1 ≤ 2A/D ≤ 1.5 ``` Where A = oscillation amplitude, D = gap width. This window grants the welding process extremely high anti-interference capability. Within this interval, process stability is significantly enhanced.

  1. Full Cycle Dynamic Behavior

The research deeply reveals the decisive regulatory effect of oscillation amplitude on the dynamic evolution of molten pool cross-sectional morphology within a complete oscillation cycle:

  • Small amplitude: Highly concentrated laser energy results in a narrow-bottom conical molten pool, with sidewalls heated only by limited heat conduction, leading to unilateral inclination and lack of fusion defects.
  • Increased amplitude: Heat dynamically accumulates at the interface between the preset plate and sidewalls, gradually broadening the molten pool bottom into a U-shape.
  • Optimized large amplitude: Laser energy achieves uniform lateral redistribution, significantly enhancing sidewall wetting characteristics and penetration depth. Within a complete left-right oscillation cycle, the molten pool overcomes thermal hysteresis effects and continuously accumulates heat under the combined action of direct irradiation and heat conduction, expanding alternately to both sides as the beam moves, ultimately establishing a perfectly symmetrical central morphology.

Performance Improvements

  • Defect elimination: Sidewall lack of fusion defects are completely eliminated within the optimized parameter range
  • Stability: High-frequency disturbance significantly improves the overall stability of the keyhole and molten pool
  • Wetting conditions: Sidewall wetting conditions are markedly improved, ensuring effective fusion between the weld and sidewalls
  • Quality consistency: Weld quality consistency is dramatically enhanced, reducing post-weld inspection and rework requirements

Industrial Significance

This technology provides a reliable solution for high-quality welding of thick plates in nuclear power equipment, pressure vessels, and large structural components. The validated process window offers clear guidance for industrial application, enabling manufacturers to achieve consistent, high-quality welds with reduced reliance on highly skilled manual welders. The findings represent a significant advancement in thick plate laser welding technology, with immediate applicability to the manufacturing of critical infrastructure components.

Academic & Research
IndustryJul 2026
Study on Lack of Fusion and Suppression Mechanism in Narrow Gap Laser Oscillation Welding of Thick Plate 316LN Stainless Steel by Institute of Plasma Physics, Chinese Academy of Sciences & Shanghai University of Engineering Science

The study proposes and systematically verifies a pre-filled narrow-gap laser oscillation welding technology, comprehensively analyzes the remodeling mechanism of laser oscillation on the thermodynamics and fluid dynamics behavior inside ultra-deep...

Source: toutiao.com
IndustryJul 2026
Welding and Joining of Advanced High-Strength Steels (2nd Edition)

This special issue covers the latest research in AHSS welding, including AI-assisted intelligent welding, finite element analysis, Gleeble-based physical simulation, and various aspects of arc welding processes. It highlights research on electropl...

Source: mdpi.com
IndustryJul 2026
A cross-process welding penetration status prediction algorithm based on unsupervised domain adaptation in laser and TIG welding

Researchers propose an unsupervised domain adaptation framework integrated with a gradual source domain expansion strategy that achieves high accuracy in both same-process and cross-process transfer tasks. It attains average accuracies of 90.65% o...

Source: arxiv.org
Events & Conferences
IndustryJul 2026
The 29th Beijing Essen Welding & Cutting Exhibition Concludes Successfully, 2027 Shanghai Appointment for 40th Anniversary

The 29th Beijing Essen Welding & Cutting Exhibition was held at Shenzhen World Exhibition & Convention Center from June 29 to July 2, 2026. Over four days, it received 30,994 visitors including 2,035 overseas visitors from 86 countries and regions...

Source: thepaper.cn
IndustryJul 2026
2026 China (Guangzhou) International Hardware & Electrical Appliances Expo - Welding Equipment Section

The exhibition will be held from September 16-18, 2026 at the China Import and Export Fair Complex in Guangzhou. It covers 50,000 square meters, expects 1,000+ exhibitors and 30,000+ visitors. The welding equipment section showcases laser welding,...

Source: 11467.com
IndustryJul 2026
2026 China International Pipe Exhibition (Shanghai Pipe Manufacturing Equipment Exhibition)

The exhibition will be held from September 21-24, 2026 at Shanghai New International Expo Center. It focuses on welding units, steel pipe sawing, and pipe processing. The welding unit zone showcases high-frequency welded pipe units, straight seam/...

Source: 11467.com
Market & Industry
IndustryJul 2026
Chinese Welding Robot Exports Surge, Production Capacity to Double

China became a net exporter of industrial robots in 2025. In the first half of 2026, exports reached 6.29 billion yuan, up 18.6% year-on-year, sold to 141 countries and regions. European and American market orders for welding applications have sur...

Source: toutiao.com
IndustryJul 2026
2026 Welding Robot Development Trends In-depth Insight Report

The report predicts that the global welding robot market will reach $9-12 billion in 2026, with China exceeding 16.8 billion yuan, becoming the core engine of global growth. Key trends include AI vision improving welding yield from 92% to 99.5%, c...

Source: book118.com
Technology
IndustryJul 2026
3Srobotics Completes Hundreds of Millions B Round Financing for Welding Embodied Intelligence

Shanghai 3Srobotics announced the completion of a B round financing of hundreds of millions of yuan, led by Shanghai Semiconductor Industry Investment and Jinqiao Fund. The company has a unique "three-in-one" core capability: AI algorithm + weldin...

Source: toutiao.com
IndustryJul 2026
Nearly 50 New Products Emerge, 2026 Becomes the "First Year of Embodied Intelligence Welding"

In the first half of 2026, welding robot shipments for leading companies nearly doubled compared to the whole of 2025. Nearly 50 new welding robot products were released, covering industrial robots, collaborative robots, embodied intelligence robo...

Source: sina.com.cn
IndustryJul 2026
First Batch of Offshore Engineering Flexible Manufacturing Intelligent Welding Robots Put into Use

COOEC independently developed the first batch of offshore engineering flexible manufacturing intelligent welding robot systems, which were officially put into use at the Tianjin Intelligent Manufacturing Base. Designed for high-difficulty heavy-du...

Source: weibo.cn
Browse Our News Archive

Explore our complete collection of historical welding industry news, market analysis, and technological developments from previous issues.

View Archive

Top^