Monday, August 17, 2026
Happening Now in Welding Industry
Dalian University researchers advance triple-wire indirect arc additive manufact
Featured Story

Dalian University researchers advance triple-wire indirect arc additive manufact

Researchers at Dalian University of Technology used a bypass-coupled triple-wire indirect arc additive process to co-deposit ER50-6 low-alloy steel an

4,195 chars 3 min read Academic & Research
11.4 kg/h
Deposition Rate
1035 MPa
Tensile Strength
26%
Elongation
380 HV
Vickers Hardness

Transactions of the China Welding Institution, Vol. 47 No. 7, 2026 August 17, 2026

A research team at the School of Materials Science and Engineering and the Key Laboratory of Advanced Connection Technology of Liaoning Province at Dalian University of Technology has developed a bypass-coupled triple-wire indirect arc additive manufacturing process capable of simultaneously melting two dissimilar filler wires — ER50-6 low-alloy high-strength steel and ER316L stainless steel — to deposit high-strength low-alloy steel wall components. The work, led by Su Shuhang and Professor Liu Liming and published in the Transactions of the China Welding Institution (2026, 47(7): 1–8), reports a new high-deposition-rate route for wire-arc additive manufacturing (WAAM) of structural steels.

Process and Parameters

The team systematically investigated the arc morphology and metal-transfer behavior during synchronized feeding of three wires. An automatic wire-feeding system monitored and adjusted welding parameters to control deposit geometry and mechanical performance. Optimal forming accuracy — with smooth wall surfaces — was achieved at a welding current of 320 A, a layer height of 3 mm, a main-wire feed speed of 6.5 m/min, side-wire feed speeds of 5 m/min, and a travel speed of 8 mm/s. Under these conditions the metal deposition rate reached 11.4 kg/h, which is substantially higher than typical single-wire gas metal arc additive processes and competitive with plasma or hot-wire WAAM alternatives.

The bypass-coupled configuration separates the main arc current from the workpiece current, reducing heat input to the substrate while maintaining high melt-off rates from the three wires. The co-feeding of carbon-steel and stainless-steel wires allows in-situ alloying of the deposit, giving a route to compositionally graded or locally reinforced structures without switching filler stock mid-build.

Microstructure and Mechanical Performance

Because the melt pool cools rapidly in the WAAM process, austenite underwent undercooled transformation, producing both martensitic and bainitic phases in the as-deposited wall. The resulting multi-phase microstructure combined with the dissimilar-wire alloying strategy produced the following average mechanical properties:

  • Tensile strength: 1035 MPa
  • Elongation after fracture: 26%
  • Vickers microhardness: 380 HV

All three indicators fall within the qualified performance range for low-alloy high-strength steel engineering components. The authors attribute the strength-ductility balance to the coupled strengthening from martensite (high strength) and bainite (improved toughness), together with grain refinement associated with the repeated rapid thermal cycles of additive deposition.

Innovations and Significance

Two principal innovations are highlighted:

  1. A new process route for bypass-coupled dissimilar triple-wire indirect arc additive manufacturing of high-strength low-alloy steel components, demonstrating that ER50-6 and ER316L can be co-deposited in a single pass with stable wall geometry.
  2. Clarification of how dissimilar-wire droplet transfer affects forming and properties, mapping the relationship between adjustable process parameters and the resulting microstructural evolution.

The findings provide a feasible, high-efficiency, high-performance alternative for manufacturing large structural steel components by wire-arc additive manufacturing. Industries such as construction machinery, shipbuilding, pressure vessels, and heavy equipment — where lead times for forgings or castings are long — are potential beneficiaries. The combination of high deposition rate, in-situ alloying flexibility, and as-deposited mechanical performance above the 1000 MPa tensile band positions the process as a credible alternative to both conventional WAAM and some powder-based directed-energy-deposition approaches for steel.

About the Publication

  • Journal: Transactions of the China Welding Institution, 2026, Vol. 47, Issue 7, pp. 1–8
  • DOI: 10.12073/j.hjxb.20250709002
  • Authors: SU Shuhang, BA Xianli, LI Yao, FAN Xiaoyu, LIU Liming
  • Affiliations: School of Materials Science and Engineering, Dalian University of Technology; Key Laboratory of Advanced Connection Technology of Liaoning Province
  • CLC: TG444
Technology & Innovation
TechAug 2026
China deploys first embodied AI robot for high-risk tasks - CGTN

China has put its first embodied intelligent humanoid robot into operation for high-risk industrial tasks, marking a new step in applying artificial intelligence (AI) to real-world scenarios. The robot is capable of performing tasks such as weldin...

Source: CGTN
Academic & Research
ResearchAug 2026
Dalian University researchers advance triple-wire indirect arc additive manufacturing for high-strength steel

Researchers at Dalian University of Technology used a bypass-coupled triple-wire indirect arc additive process to co-deposit ER50-6 low-alloy steel and ER316L stainless steel wires, producing high-strength low-alloy steel wall components. At 320 A...

Source: Transactions of the China Welding Institution
ResearchAug 2026
Xihua University team reports ultrasonic welding advance for Invar 36 low-ductility alloy sheets

A team led by Professor Peng Biyou at Xihua University published work in the Journal of Materials Processing Technology on ultrasonic metal welding of 0.53 mm Invar 36 sheets. Presetting a horn-anvil gap of 0.5-0.7 mm acted as a position-triggered...

Source: Xihua University News
ResearchAug 2026
Qingdao researchers study cracking and corrosion of laser-welded SS304 stainless steel edge joints

Researchers at Qingdao University of Science and Technology combined experiments and Simufact Welding FEA to investigate laser-welded circular edge joints of deformed SS304 stainless steel used in water-heater tanks. Cold cracks appeared in the ba...

Source: Journal of Qingdao University of Science & Technology
ResearchAug 2026
CRRC Qingdao and HIT detail porosity control in laser-TIG hybrid welding of Al-Mg-Zn alloy

CRRC Qingdao Sifang and Harbin Institute of Technology studied laser-TIG hybrid welding of 4 mm T6-tempered Al-7Mg-3Zn alloy for rail transit car bodies. At 2.4 kW laser power, porosity fell to a minimum of 0.66% before rising to 2.28% at 2.8 kW, ...

Source: Electric Welding Machine journal
ResearchAug 2026
SJTU team reviews weldability and microstructure control of high-performance Al-Li alloys

Professor Wu Guohua's team at Shanghai Jiao Tong University published a comprehensive review in Materials on welding of high-performance aluminum-lithium alloys for aerospace. The review covers weldability across alloy compositions, processes incl...

Source: ScienceNet / Materials (MDPI)
Browse Our News Archive

Explore our complete collection of historical welding industry news, market analysis, and technological developments from previous issues.

View Archive

Top^