Monday, August 24, 2026
Happening Now in Welding Industry
Welding Machine Magazine 2026 Volume 56 Issue 7 Forming Control Strategy of UFP-
Featured Story

Welding Machine Magazine 2026 Volume 56 Issue 7 Forming Control Strategy of UFP-

"Welding Machine" magazine, Volume 56, Issue 7, 2026, focuses on the UFP-TIG arc fuse process forming control strategy for aluminum alloy frame compon

3,290 chars 2 min read Technology & Innovation
20% → 0.54%
Arc-Extinguish Height Deviation
18.6% → 0.9%
Bending Deviation at 30° Angle
14.96% → 8.56%
Intersection Height Difference
Vol.56 No.7
2026 "Welding Machine" Issue

"Welding Machine" magazine (sponsored by Chengdu Electric Welding Machine Research Institute Co., Ltd.) August 24, 2026

"Welding Machine" magazine, Volume 56, Issue 7, 2026, focuses on the paper "UFP-TIG arc fuse process forming control strategy for aluminum alloy frame components". The authors are Sun Xuejun, Yan Huixing, Li Wenshuo, Jiang Zihao, Cong Baoqiang, Jiang Kun, Yang Kai, DOI: 10.7512/j.issn.1001-2303.2026.07.01. The research was published in "Welding Machine" (monthly, ISSN 1001-2303, CN 51-1278/TM), an authoritative academic journal in the field of welding sponsored by China Chengdu Welding Machine Research Institute Co., Ltd.

Aluminum alloy frame components are widely used in the aerospace field. However, during the arc fuse additive manufacturing process, positional features such as arc extinguishing, bending, and intersection can easily cause forming defects such as necking, stacking, and collapse, which seriously restrict the dimensional accuracy and manufacturing efficiency of the components. To address this problem, based on the UFP-TIG (Ultra Audio Impulse TIG) arc fuse manufacturing system, this paper systematically analyzes the formation mechanism of three types of typical positional characteristic defects in frame components, and proposes a multi-parameter collaborative forming control method.

In terms of arc-extinguishing position control, the research team proposed a current-wire feeding-motion coordinated attenuation strategy, which reduced the height difference between the arc-extinguishing position and the middle part from 20% to 0.54%. In terms of bending position control, arc transition, corner rotation and end overlap methods are used according to the angle characteristics, so that the bending position height deviation of 150°, 90° and 30° components is reduced from 1.2%, 4.7% and 18.6% to 0.19%, 0.45% and 0.9% respectively. In terms of intersection position control, taking advantage of the independent control of the heat transfer and mass transfer processes of the TIG process, a "crossover" control method was proposed to reduce the average height difference between the intersection position and the surroundings from 14.96% to 8.56%.

Error 500 (Server Error)!!1500.That’s an error.There was an error. Please try again later.That’s all we know.

The key words of this paper are: aluminum alloy frame structure, arc fuse additive manufacturing, super audio pulse TIG, multi-parameter collaborative control, and forming accuracy. At the same time, "Welding Machine" magazine also published "Study on pore suppression and mechanical properties of new high-strength Al-Mg-Zn alloy laser-TIG composite welding joint" (DOI: 10.7512/j.issn.1001-2 303.2026.07.02), "Research Progress in Advanced Connection Technology of Medium and Thick Plate Titanium Alloys: Fusion Welding, Solid Phase Welding and Intelligent Control" (DOI: 10.7512/j.issn.1001-2303. 2026.07.03) and "Research on Friction Stir Welding Quality Evaluation System Based on Grid Clustering Algorithm" (DOI: 10.7512/j.issn.1001-2303.2026.07.04) and other high-quality welding research papers, covering cutting-edge directions such as laser-TIG hybrid welding, titanium alloy connection, friction stir welding quality evaluation, etc., reflecting the continuous deepening of Chinese welding academic circles in the fields of additive manufacturing and advanced connection technology.

Technology & Innovation
TechAug 2026
China makes new innovation in robot welding and inspection, aiding long-distance oil and gas pipeline construction

China has achieved new progress in industrial automation with a self-developed pipeline welding and inspection robotic system, which is now being widely deployed to boost construction efficiency for long-distance oil and gas pipelines in challengi...

Source: Global Times
TechAug 2026
China's Welding Technology Makes Major Breakthroughs, With New Energy And Intelligence Driving Industry Upgrades

The welding industry is undergoing a new wave of technological innovation, driven by global manufacturing's shift towards intelligence and green development. Significant breakthroughs have been made in domestic welding robots and fully automated w...

Source: Vertex AI Search
TechAug 2026
China's Laser "Wonder Machine" Tops the Globe: Welding an Entire Vehicle in 43 Seconds

China's laser technology has broken foreign monopolies, achieving remarkable results in medium-thick plate welding, handheld laser welding, and ultra-fast laser welding. The country can now form complex titanium alloy components larger than 12 squ...

Source: Vertex AI Search
TechAug 2026
Renxin Welding Robot Unveils Navigator Robot: 3D Point Cloud Processing Enables Programming-Free Welding

The Navigator robot exhibited by Renxin Welding Robot (Chengdu) Co., Ltd. is suitable for construction steel structures, bridge engineering, marine engineering, large container manufacturing and other fields. The robot uses three-dimensional point...

Source: Welding Equipment Branch Media
TechAug 2026
China's industrial robots reshape smart manufacturing

Chinese-made industrial robots are now being deployed at scale in automotive body welding lines, a domain previously dominated by foreign manufacturers, with Siasun Robot & Automation Co., Ltd. successfully deploying nearly 100 industrial robots i...

Source: Xinhua
TechAug 2026
China unveils first welding robot system, tailor-made for offshore oil and gas platforms

China has operationalized its first homegrown intelligent welding robot system for flexible manufacturing in marine engineering. This system is specifically designed for complex, customized heavy-load welding scenarios, boasting a 20-year design l...

Source: ShanghaiEye
TechAug 2026
A Chinese startup has unveiled what it says is the industry's first embodied AI welding robot built for industrial use, and it's already working in more than 10 factories

A Chinese startup has introduced what it claims to be the industry's first embodied AI welding robot designed for industrial applications, which is already operational in over 10 factories.

Source: China Xinhua News - Facebook
TechAug 2026
AI Reshapes the Welding Spark: Overcoming the 3-Million-Worker Shortage, China's Welding Market Enters the "Intelligent Leap" Deep Zone

Under the pressure of a growing welder shortage and the manufacturing industry's shift towards multi-variety, small-batch production, China's welding market is transitioning from equipment dependence to knowledge empowerment. Recent industry devel...

Source: Wuhan ONEW Technology Co., Ltd.
TechAug 2026
Guangdong Hangao Technology: A Benchmark for High-Quality Pipe Making Machine Manufacturing in China - Barchart.com

Guangdong Hangao Technology developed a three-cathode welding system using dual electromagnetic control in 2024, significantly improving welding speed and quality while reducing defects. In 2025, the company designed a stainless steel air conditio...

Source: Barchart.com
TechAug 2026
Welding Machine Magazine 2026 Volume 56 Issue 7 Forming Control Strategy of UFP-TIG Arc Fuse Process for Aluminum Alloy Frame Components

"Welding Machine" magazine, Volume 56, Issue 7, 2026, focuses on the UFP-TIG arc fuse process forming control strategy for aluminum alloy frame components, as well as the study of pore suppression and mechanical properties of new high-strength Al-...

Source: "Welding Machine" magazine
Events & Conferences
EventsAug 2026
List of times and locations of the 2026 Welding and Cutting Exhibition

2026 welding and cutting exhibition schedule: Wuhan Laser Welding and Cutting Exhibition from September 22 to 24, Shanghai Laser Processing and Welding and Cutting Exhibition from December 3 to 5, Zhuzhou Welding and Cutting Technology Equipment E...

Source: Exhibition Network
Browse Our News Archive

Explore our complete collection of historical welding industry news, market analysis, and technological developments from previous issues.

View Archive

Top^