Chinese researchers led by Soochow University have demonstrated that welding under elevated ambient pressure can sharply suppress nitrogen loss in high-strength nitrogen-containing austenitic stainless steel — a long-standing barrier to wider industrial use of this material class. The work, published in the flagship Transactions of the China Welding Institution, was conducted by TANG Zhe and colleagues from the School of Metallic Materials and Advanced Manufacturing at Soochow University, together with teams from the 52nd Institute of China North Industries Group (Ningbo), the Materials Academy of JITRI (Suzhou) and Nanjing University of Science & Technology.
The problem: nitrogen escaping the weld
High-strength nitrogen-containing austenitic stainless steel derives much of its strength from dissolved nitrogen. During conventional welding, that nitrogen readily escapes from the molten pool, leaving welds weaker and more porous than the base metal. Keeping nitrogen in the weld has therefore been a key technical obstacle limiting the material's application.
The method: pressurized MIG welding
The team proposed a pressurized-environment metal inert-gas (MIG) arc welding approach. They welded a base plate of high-strength austenitic stainless steel containing 0.64% nitrogen using a high-nitrogen filler wire with 0.8% nitrogen, systematically studying how ambient pressure affects weld nitrogen content, porosity and overall mechanical properties.
The results
Under pressurization, the results were dramatic:
- Weld nitrogen content rose from 0.54% to 0.60% by mass.
- Porosity collapsed from 22 pores to just 3.
- Yield strength jumped from roughly 300 MPa to above 700 MPa, with ultimate tensile strength reaching up to 924.1 MPa.
- Impact absorption energy fell from about 32 J to about 11 J — the main trade-off observed.
Thermodynamic calculations confirmed the mechanism: at ambient pressures of 100–180 kPa, the theoretical nitrogen solubility in the weld rises from 0.81% to 1.01%. Because weld solidification did not pass through a fully single-austenite phase region, actual nitrogen content did not reach the theoretical ideal — but the experiments nonetheless confirmed clear potential for pressurized MIG as an industrial process.
Why it matters
The study offers both a practical process route and a theoretical framework for suppressing nitrogen bubble escape and improving weld pool performance in nitrogen-alloyed stainless steels. The authors note the findings provide a reference for welding process optimization and for eventual industrial application — relevant for sectors that need high-strength, corrosion-resistant welded joints, from pressure vessels and energy equipment to defense and heavy engineering. The innovation is twofold: introducing pressurized-environment MIG welding to this material system, and combining thermodynamics with experiments to reveal how nitrogen dissolves and bubbles form during welding.
This research article appeared in the September 2026 issue of the China Welding Institution's journal.