Friday, September 11, 2026
Happening Now in Welding Industry
3600 times faster: China is shaking up the steel industry
Featured Story

3600 times faster: China is shaking up the steel industry

A Chinese research team has developed 'flash ironmaking' technology, which can collapse the traditional steelmaking process into just three to six sec

3,677 chars 3 min read Technology & Innovation
3,600×
Ironmaking Speed Gain
3–6 sec
Flash Reduction Time
450 t/hr
Ore Injection per Lance
7.11 Mt
Annual Iron per Reactor

THERMPROCESS / South China Morning Post September 11, 2026

A Chinese research team has developed a new iron production technology that can reduce iron ore in seconds instead of hours, with almost no impact on the climate. The innovation works without coal and can also handle low-quality raw materials. The 'explosive' ironmaking breakthrough achieves a 3,600-fold productivity boost.

After more than a decade of intensive research in China, the new ironmaking technology is poised to revolutionise the global steel manufacturing industry, according to the South China Morning Post.

How flash ironmaking works

The method involves injecting finely ground iron ore powder into an extremely hot furnace, triggering an "explosive chemical reaction," according to the engineers involved in the project. The result is a display of bright red, glowing liquid iron droplets that rain down and collect at the bottom of the furnace, forming a stream of high-purity iron that can be directly used for casting or "one-step steelmaking."

Known as flash ironmaking, the method "can complete the ironmaking process in just three to six seconds, compared to the five to six hours required by traditional blast furnaces," wrote the project team led by Professor Zhang Wenhai, an academician of the Chinese Academy of Engineering, in a paper published in the peer-reviewed journal Nonferrous Metals. This equates to a 3,600-fold or more increase in the speed of ironmaking.

The new method also works exceptionally well for low or medium-yield ores that are abundant in China. Existing iron production methods depend heavily on high-yield ores, and China spends a huge amount of money importing these ores from Australia, Brazil and Africa.

Near-zero carbon dioxide emissions

According to calculations by Zhang and his colleagues, the new technology could improve the energy use efficiency of China's steel industry by more than one-third. Because it eliminates the need for coal entirely, it would also enable the steel industry to achieve the goal of "near-zero carbon dioxide emissions."

One of the most daunting technical challenges in bringing flash ironmaking to life is the ore-spraying lance. Iron ore must be dispersed in a high-temperature, high-reducibility tower space with a large specific surface area to trigger the explosion. Zhang's team has developed a vortex lance with exceptional uniform distribution performance, capable of injecting 450 tonnes of iron ore particles per hour. A reactor equipped with three such lances can produce an impressive 7.11 million tonnes of iron annually. According to the paper, the lance "has already entered commercial production."

A decades-long research journey

Zhang's journey with flash smelting technology began in the 1970s when he applied it to large-scale copper production. Today, China's consumption of copper accounts for nearly 60 per cent of global production, a testament to Zhang's enduring impact on the industry. While the idea of applying this process to ironmaking originated in the United States, it was Zhang's team who invented a flash smelting technology capable of directly producing liquid iron. They obtained a patent in 2013 and spent the next decade refining the method.

"The completed laboratory and pilot tests have proven the feasibility of the process," Zhang wrote. According to government statistics, the success rate for new technologies that have undergone pilot tests exceeds 80 per cent in China.

For the welding and metals fabrication sector, the implications are significant: a step-change in the cost, speed and carbon footprint of raw iron supply would flow directly into steel plate, wire and consumables markets that underpin the welding industry.

Technology & Innovation
TechSep 2026
Xingjian Robotics raises tens of millions of yuan in Series B to advance embodied-AI welding for shipbuilding

Recently, Anhui Xingjian Intelligent Manufacturing Equipment Co., Ltd. announced the completion of tens of millions of yuan in Series B financing. This round of financing was exclusively invested by Yinfeng Capital. The funds will be mainly used t...

Source: Investment Industry/Sohu
TechSep 2026
3600 times faster: China is shaking up the steel industry

A Chinese research team has developed 'flash ironmaking' technology, which can collapse the traditional steelmaking process into just three to six seconds, with near-zero emissions, marking a significant advancement in the metallurgy industry.

Source: Futura Sciences
TechSep 2026
The forefront of resistance welding technology: breakthroughs in intelligent control and adaptation to new materials

Resistance welding technology is shifting from experience-driven to data-driven. By monitoring current, pressure and temperature in real time, the intelligent system can dynamically adjust parameters to increase the welding qualification rate to m...

Source: Baidu B2B Encyclopedia
TechSep 2026
China Deploys First Indigenously Built Robotic System To Handle Welding At Offshore Oil & Gas Rigs

China has deployed an AI-driven robotic system, developed by Offshore Oil Engineering Co., to handle complex marine welding for offshore oil and gas rigs in Tianjin. This system removes human workers from hazardous situations, boosts operational e...

Source: Marine Insight
TechSep 2026
Robotic Welding in China: Automation, Use Cases, and Supplier Strategy

China's robotic welding sector is at the forefront of global automation, driven by national policy and market forces. The article highlights the latest technologies, market dynamics, and supplier strategies, noting the increasing adoption of AI, m...

Source: ChoZan
TechSep 2026
China's Welding Technology Makes Major Breakthroughs, With New Energy And Intell.

Significant breakthroughs have been made in China's domestic welding robots and fully automated welding processes, driven by the demands of the new energy and shipbuilding sectors. This includes multi-sensor fusion solutions for autonomous weld se...

Source: WeldKing
TechSep 2026
Three generations of welders forging China's high-speed railway future

This article highlights the development of China's high-speed railway welding technology, including the creation of China's first autonomous high-speed rail welding standard and the adoption of robotic welding, showcasing continuous innovation and...

Source: Chinadaily.com.cn
TechSep 2026
Huashi Technology releases September 2026 national welding robot procurement guide

Guangdong Huashi Technology outlined six quantifiable criteria for selecting welding automation equipment, including compatibility with three or more welding processes and five metals, 24-hour continuous operation with spot accuracy within ±2%, at...

Source: mobile sohu.com
TechSep 2026
Siasun wins 2026 China intelligent welding industry innovation award as AI-enabled robots expand beyond automotive

Siasun Robot & Automation received the 2026 China Intelligent Welding Industry Innovation Award after deploying nearly 100 large-payload spot welding robots on Geely's Yiwu plant body shop, ending a 30-year foreign monopoly in automotive welding l...

Source: Shenyang Xinsong Robot Automation Co., Ltd.
Academic & Research
ResearchSep 2026
World's First: China Deploys Underwater Welding In-Situ Neutron Diffraction Research Device

China has commissioned a world-first underwater welding in-situ neutron diffraction research device at the China Spallation Neutron Source, allowing for real-time microstructure observation and transitioning underwater welding from an experience-d...

Source: WeldKing
ResearchSep 2026
How Chinese scientists created an alloy that can survive 2400 degrees Celsius

Scientists at Xian Jiaotong University in China have developed a tantalum alloy capable of retaining strength at ultra-high temperatures, up to 2,400 degrees Celsius, offering new possibilities for applications in aerospace, hypersonic vehicles, a...

Source: South China Morning Post
New Equipment & Products
IndustrySep 2026
30th Beijing Essen Welding & Cutting Fair set for June 2027 in Shanghai

The Chinese Mechanical Engineering Society officially announced that the 30th Beijing Essen Welding & Cutting Fair will be held June 23-26, 2027 at the Shanghai New International Expo Centre, marking the fair's 40th anniversary. Jointly hosted by ...

Source: Chinese Mechanical Engineering Society
Browse Our News Archive

Explore our complete collection of historical welding industry news, market analysis, and technological developments from previous issues.

View Archive

Top^