A new review published in China's Welding Journal (HWI) systematically surveys the state of the art in the mechanical performance of duplex stainless steel (DSS) welded joints — a material class that sits at the heart of marine engineering, chemical process equipment, and pressure vessels.
Duplex stainless steels owe their appeal to a balanced two-phase microstructure of ferrite and austenite, which together deliver high strength, good toughness, and outstanding corrosion resistance. But that balance is exactly what welding puts at risk. The heat of welding drives microstructural evolution in the joint, and the review identifies welding as the decisive step that determines whether a fabricated DSS structure keeps the properties its base metal promises.
What the review covers
The authors — GUO Xiao, HUANG Jiangzhong, WEI Zhen, YU Chaofei, and ZHOU Lukuan — organize the literature around the three regions of a welded joint:
- Base metal, whose ferrite/austenite ratio sets the benchmark for strength and corrosion behavior;
- Heat-affected zone (HAZ), where rapid thermal cycling can shift the phase balance and coarsen grains;
- Weld metal, where solidification conditions and filler-metal chemistry determine the final microstructure.
For each region, the review connects microstructural features to measurable outcomes: tensile strength, impact toughness, and fracture behavior.
Key factors governing joint performance
Beyond the basic zone-by-zone analysis, the paper summarizes the mechanisms by which four practical factors shape joint quality:
- Secondary phase precipitation — embrittling phases such as sigma and nitrides, which form when joints spend too long in critical temperature ranges, degrade toughness and corrosion resistance.
- Thermal cycling characteristics — heat input and multi-pass sequences control how much austenite re-forms and how coarse the structure becomes.
- Residual stress distribution — welding-induced stresses influence distortion, cracking susceptibility, and service performance under cyclic loads.
- Filler metal composition matching — nickel-rich fillers and controlled nitrogen content help restore phase balance in the weld metal.
The central finding
The review's core conclusion is that microstructural imbalance and the formation of brittle phases induced by welding are the primary causes of mechanical property degradation in DSS joints. The degradation is not inevitable: the authors find that the comprehensive performance of a joint can be significantly improved through three levers — optimized welding process parameters, improved filler metal design, and properly executed post-weld heat treatment.
For fabricators in shipbuilding, offshore platforms, chemical plants, and pressure vessel shops, the message is practical: controlling heat input, choosing filler metals that rebalance the two phases, and applying post-weld heat treatment where appropriate can keep a welded DSS structure close to the performance of the parent material.
The review, supported by 89 references, aims to provide both a theoretical basis and engineering guidance for microstructural regulation and performance optimization of duplex stainless steel welded joints — a timely contribution as demand grows for corrosion-resistant, high-strength welded structures in marine and energy applications.