An equipment manufacturer based in Hebei, China has announced that a welding production line built around a domestically developed robot laser welding subsystem has been officially put into operation. The line is used mainly for welding galvanized sheet, and combines a laser source with industrial robots to offer manufacturers a path toward automated upgrading. The laser welding subsystem at the heart of the line comes from Shenzhen Baochenxin Laser.
Why galvanized sheet is hard to weld
Galvanized steel is widely used in sheet-metal fabrication, hardware manufacturing, automotive production and heavy machinery. But its laser welding presents a distinctive process challenge: the boiling point of zinc (906 °C) is far below the melting point of iron (1538 °C). During welding, the zinc coating vaporizes easily, which triggers spatter and porosity and degrades weld quality.
To address this scenario, Baochenxin supplied a robot welding subsystem equipped with its self-developed continuous-fiber laser, a double-pendulum swing welding head, and an intelligent control system. In production, precise optical-path optimization and power control effectively suppress spatter, producing uniform, porosity-free welds that need no post-weld grinding, which raises product yield. Because laser welding is fast and the robot delivers a high-tempo motion cycle, single-station productivity is higher than traditional manual welding, and the small heat-affected zone leaves galvanized sheet with negligible distortion — eliminating the straightening step and lowering overall manufacturing cost.
According to line operators, all welding parameters can be set from a single control screen, and ordinary workers can take up the job after short training, easing the industry's welder shortage. The equipment maker said Baochenxin's team provided deep technical support from solution discussions through commissioning, shortening the line-upgrade cycle.
A standardized, plug-and-play welding unit
Baochenxin describes the subsystem as a standardized solution that, through integrated design, forms a "plug-and-play" intelligent welding unit with high integration, a rich process library, high safety, and diverse professional light-source options. On the hardware side, the system uses a high-performance laser with either a fixed or a swing welding head, both optically optimized.
The system supports the Modbus-RTU protocol, allowing welding parameters to be written remotely through the robot teach pendant, and offers multiple control modes: an operator can set every welding parameter from a touchscreen. For different materials and thicknesses, Baochenxin provides welding selection guides and process packages that quickly locate the welding window for either keyhole (deep-penetration) welding or heat-conduction welding; parameters can be adjusted for penetration depth and weld width and stored for recall. Operators do not need to enter the robot's working area — parameter setting and process debugging are done from a centralized controller in a safe zone.
On light sources, the standard configuration is the M-series welding-grade source, with an electro-optical conversion efficiency of up to 43% and long-term output stability of ±2%. The optional P-series laser adds power compensation with short switching delays and microsecond-level response, plus multiple protective functions. An optional ring-spot laser performs dual-beam welding that effectively suppresses spatter and suits applications with the most demanding weld-forming requirements.
Deployment forms and outlook
The subsystem targets welding integrators, retrofit providers and end users, and is applicable to sheet-metal processing, hardware manufacturing, heavy machinery, automotive manufacturing, new energy, and 3C electronics; it has already landed at multiple customer sites. Baochenxin also offers the subsystem in split, integrated, customized and mobile welding platform forms.
One of these, the XR1500 mobile welding platform, was unveiled at the Munich Shanghai Laser Show. Aimed at small-batch, high-variety welding jobs in non-fixed workstations, it merges an air-cooled laser, an intelligent double-pendulum welding head and a mobile cart platform, supports rapid collaborative-robot deployment and plug-and-play operation without complex installation, and can flexibly serve non-standard scenarios such as outdoor fields, high-altitude work, and workshop corners.
Baochenxin says it will continue to deepen its "laser + robot" innovation and explore automated welding applications across different industrial scenarios.